Written, itemized quotes across Toronto - no obligation
$2,800 – $5,200 typical 2-car Hot tire pickup resistant Road salt rated Driveable in 24 h (polyaspartic)

Garage floor coatings built for Toronto winters

A Toronto garage floor takes road salt, freeze-thaw and hot tires in the same season. Ontario Flooring Contractors specifies and installs coatings that survive all three.

Diamond-ground and crack-repaired before coating
Polyaspartic option cures in the cold
Flake broadcast hides slab repairs
Written scope, no surprise extras

Price your garage floor

Tell us the garage size – one car, two car or oversized – and what the slab looks like now.

What can we help with?

So the right crew reviews your project.

No obligation. Any workmanship warranty is set out in your written quote, job by job.

$2,800-$5,200 Typical two-car garage, standard epoxy
400-600 Square feet in a typical two-car garage
$200-$500 Vinyl flake broadcast, added
$18-$35 Crack repair, per linear metre
The Toronto problem

Salt, meltwater and hot tires attack a garage floor in that order

A car pulls in coated in brine, the slab warms, and salt-laden meltwater sits on the concrete and works into every pore and hairline crack. Freeze-thaw then opens those cracks further. On top of that, a warm tire parked on an uncured or thin coating lifts it when it cools and grips. This is why garage coatings fail here and not in milder cities, and why the grind, the crack repair and the cure schedule matter more than the colour.

What we do differently on a garage floor coating

Grind, not etch

Mechanical diamond grinding opens the slab profile. Acid etching leaves residue and an inconsistent key, and it is why so many garage floors peel at the door.

Cold-cure option

Polyaspartic at $10 to $18 per square foot cures at lower temperatures, so an unheated garage can be coated outside the summer window.

Hot tire tested systems

The coatings we use are specified against hot tire pickup. A thin roll-on system is not, whatever the box says.

Our Process

Your garage floor coating, start to finish

1

Empty and assess

The garage is cleared, the slab is read for moisture and the cracks and spalled edges are mapped.

2

Grind and repair

Diamond grinding under HEPA extraction, then cracks and joints filled and the apron edge made good.

3

Prime and base coat

Primer matched to the moisture reading, then the base coat, with flake broadcast into it if specified.

4

Topcoat and cure

Clear topcoat, then cure. Foot traffic first, vehicles when the system allows it.

Worth knowing

The garage floor apron at the door fails first

Walk any Toronto garage and the concrete is worst in the first metre or so just inside the door. That edge takes the brine off the tires, then holds meltwater against the slab, then freezes. Over enough winters the surface spalls away and the aggregate shows through. Coating over that without rebuilding it just puts a film on crumbling concrete and it lifts within a season. Apron repair is quoted as its own line because it is real concrete work, not a coating step.

Garage floor epoxy prices in Toronto

Toronto 2026, installed. A typical two-car garage is 400 to 600 square feet.

One-car garage

$1,600 – $3,000

Roughly 220 – 300 sq ft
Standard epoxy system
Diamond grind and crack repair
Single colour or flake

Get a quote
Most popular

Two-car garage

$2,800 – $5,200

Roughly 400 – 600 sq ft
Standard epoxy system
Diamond grind and crack repair
Flake broadcast adds $200 – $500

Get a quote

Two-car, polyaspartic

$4,500 – $7,500

Same area, one-day system
Driveable in 24 hours
Cures in cold conditions
UV stable topcoat

Get a quote

Garage floor epoxy clients on the finished slab

Reviews collected directly from clients.

5/5

Ontario Flooring installed new hardwood flooring throughout our home, and the results look beautiful. The crew was careful, professional, and kept the work area clean from start to finish.

Michael C.

Client direct

5/5

Ontario Flooring replaced old carpet in our bedrooms with new flooring. They worked efficiently, helped us understand the options, and completed the installation on schedule.

Amanda S.

Client direct

Garage floor epoxy questions

How long will I be without the garage?

A standard epoxy garage is usually a two to three day job including cure before foot traffic, with vehicles later. A polyaspartic system is typically in and driveable within 24 hours, which is the main reason people pay the premium.

Do I have to move everything out?

Yes, the slab has to be completely clear for grinding. Shelving fixed to the wall can usually stay if it is off the floor, but anything standing on the concrete has to go.

My slab has cracks and a crumbling edge at the door. Is that a problem?

It is normal in Toronto and it is repairable. Cracks and joints are filled before coating, quoted at $18 to $35 per linear metre, and a spalled apron edge is rebuilt. Coating over an unrepaired crack just telegraphs it back through.

Is flake worth it?

For $200 to $500 on a typical garage, yes, if your slab has patches or repairs. The flake breaks up the surface visually and hides them, and it adds slip resistance underfoot when the floor is wet with meltwater.

Book a garage floor assessment

We read the slab, map the cracks and quote it in one visit.

Request a quote Call (343) 842-1450
Back to top